Login
E-Mail Address
Password
Forgotten Password
New Customer
Register Account
$
C$ CAD
€ Euro
£ Pound Sterling
฿ THB
$ US Dollar
The first brand of wireless networks
My Account
Checkout
0
0
$0.00
Your shopping cart is empty!
Categories
Home
All products
Surveillance Cameras
(1)
Wireless Router
(9)
AC Router
(26)
Outdoor AP
(15)
Wifi Ap/CPE
(29)
AC Core Gateway / POE
(9)
Network accessories
(35)
Show All All products
Indoor AP
Wireless Bridge
WIFI Repeater
About Us
Contact Us
How to Setup
How to Setup
How to Setup Your COMFAST WiFi Extender
Setting up Comfast Wireless Network Repeater using Simple Method
Comfast wireless network repeater Video
Step 1 – Connect to WiFi Signal COMFAST – XXXXXX
Step 2 – Open the browser and type the IP address 192.168.10.1
Step 3 – Enter the default username and password – both are admin
Step 4 – From a PC Select Repeater , smart phones won’t show this option
Step 5 – Repeater will scan for available signals
Step 6 – Select the signal you want to repeat
Step 7 – Enter the WiFi password of your wireless router
Step 8 – Wait 30 seconds while the repeater resets
Step 9 – Reconnect to the new wireless network and enter the password
Step 10 – You are all done – wireless signal should now be available after connecting. If not, hold down reset button for 30 seconds and start again.
Setting Up Comfast Wireless Network Repeater Using WPS
Step 1 – Position the Comfast Repeater beside the Network Signal Access Point ( you can re position once synced)
Step 2 – Press and hold the WPS button on your home network (5 – 10 Seconds)
Step 3 – (Within 2 minutes) Press and hold the WPS button on the Comfast Repeater for 10 Seconds
Step 4 – Flashing blue lights on the WiFi signal will indicate the connection is being set up
Step 5 – Connect to the Comfast Network Repeater which will be named “Home Network”- PLUS
Step 6 – You will be required to create or enter the password for security purposes, only once.
Step 7 – Your WiFi Network Extender is set up, reposition as required.
Comfast wifi Setting Up Access Point Instructions
Step 1 – Connect to Wireless Network COMFAST
Step 2 – Open your web browser and type in http://192.168.10.1
Step 3 – Enter username admin and password admin
Step 4 – Select “AP”
Step 5 – Set your New Network Name, Encryption Type and a new password in the Key field as below, then select “Apply”
or if you have a 2G and 5G Access Point
Step 6 – Wait for device to reboot.
Step 7 – Connect to the new wireless network you’ve named with the password you’ve set.
Step 8. You should be online, enjoy.
Comfast Wifi © 2025